Det-tronics ATX10 Transmitter SAFETY MANUAL Bedienungsanleitung PDF herunterladen

SAFETY MANUAL

FlexSonic

™

Acoustic Detector

AC100 Sensor

ATX10 Transmitter

1.2 ©Detector Electronics Corporation 2013 Rev: 6/13 95-8658

SAFETY CERTIFIED FLEXSONIC ACOUSTIC

DETECTOR

This manual addresses the speciﬁc requirements

and recommendations applicable to the proper

installation, operation, and maintenance of all Safety-

Certiﬁed (SIL-Certiﬁed) FlexSonic

™

Acoustic Detector

product versions. For complete information regarding

system overview, performance, installation, operation,

maintenance and speciﬁcations of the FlexSonic

Acoustic Detector, refer to instruction manual 95-8657.

QUALITY POLICY STATEMENT

All quality assurance control measures necessary for

safety management as speciﬁed in IEC 61508 Part 1

have been implemented. The quality management

system of Det-Tronics is based on the requirements

of EN ISO 9001 and ANSI/ASQC Q9001 through the

application of the United Technologies Company

Achieving Competitive Excellence (ACE) program. In

addition, the Quality Management System complies

with the European ATEX Directive, EN ISO/IEC 80079-

34, and supervised testing requirements per ISO 17025.

SAFETY MESSAGES

Procedures and instructions in this section may

require special precautions to ensure the safety of

personnel performing the operations. Information that

raises potential safety issues is indicated by the word

“Warning”. Always read and understand these safety

messages.

WARNING

The FlexSonic Acoustic Detector is intended for

use in hazardous environments that may include

explosive levels of ammable gases and vapors.

This product must be properly installed, operated

and maintained. Improper installation or use

could result in an explosion or re resulting in

death or serious injury.

• Do not remove the cover of a junction box in

explosive environments when device power is

on and circuits are live.

• Device must be properly installed to meet

hazardous area explosion-proof/non-incendive

and intrinsic safety requirements.

AC100 Sensor

ATX10 Transmitter

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - ATX10 Transmitter

SAFETY MANUALFlexSonic™ Acoustic DetectorAC100 SensorATX10 Transmitter1.2 ©Detector Electronics Corporation 2013 Rev: 6/13 95-8658SAFETY CERTIFIED F

Seite 2 - 1. 2 95-86582

1. 2 95-86582DESIGNThe FlexSonic Acoustic Detector recognizes the unique ultrasonic frequency content of events such as gas leaks. The FlexSonic Acous

Seite 3 - 1. 2 95-86583

1. 2 95-86583INSTALLATIONNOTEFor complete information regarding performance, installation, operation, maintenance and specications of the FlexSonic A

Seite 4 - 1. 2 95-86584

1. 2 95-86584NOTEPrior to device conguration all alarm outputs must be bypassed. The device is not safety certied during conguration change activi

Seite 5 - 1. 2 95-86585

1. 2 95-86585WARNINGAny external alarm equipment, systems or signaling devices that could be automatically initiated by performing this test must be d

Seite 6 - ISO 9001

CERTIFICATION AND FAILURE RATE DATAAll Safety-Certiﬁed FlexSonic Acoustic Detectors are certiﬁed compliant to:IEC61508: 2010Type B ElementSystematic C