Instructions 95-8502Protect•ir Multispectrum IR Flame Detectorwith Integral ‘EEx e’ Junction BoxX3300Detector Electronics Corporation6901 West 110th S
OPTICAL INTEGRITY (oi)AUTOMATIC oi The X3300 includes the Automatic Optical Integrity (oi)feature — a calibrated performance test that isautomatically
FIRE ALARM TEST1. Disable any extinguishing equipment that isconnected to the system.2. Apply input power to the system.3. Connect the oi test line to
6. If all wiring checks out and cleaning of the oiplate/window did not correct the fault condition,check for high levels of background IR radiation by
FEATURES• Long detection range to carbonaceous fires.• Unequaled false alarm rejection.• Responds to a fire in the presence of modulatedblackbody radi
120°15°45°15°30°30°DETECTOR VERTICAL FIELD OF VIEWWITH DETECTOR AT 45° FROM HORIZONTAL.0°15°15°30°45°30°45°150 ft150 ft120 ft120 ft90 ft90 ft60 ft60 f
SHIPPING WEIGHT (Approximate)—Aluminum: 6.0 pounds (2.7 kilograms).Stainless Steel: 10.0 pounds (4.5 kilograms).CERTIFICATION— CENELEC: EEx d e II
DEVICE REPAIR AND RETURNThe detector is not designed to be repaired in the field.If a problem should develop, refer to theTroubleshooting section. If
1595-8502APPENDIX AResponse Characteristics of the X3300RESPONSE CHARACTERISTICS:Fuel Size Distance Average Response Time (feet) (seconds)Gasoline 1
16X3300 Response Characteristics (0.5 Sec. Response Only)Medium SensitivityFuel Size Distance Ave. Response Time, Sec.Ft. (M) On Axis (0°) Off Axis (4
OPTICAL FAULT:The detector generated an optical fault in the presence of contamination on any single or combination of lenssurfaces verifying that the
DESCRIPTION...1FACTORY CONFIGURATION OPTIONS...3GENERAL APPLICATION I
18FALSE ALARM IMMUNITY:False Alarm Source Distance Modulated Response Unmodulated Response(feet)Sunlight, direct, reflected — No alarm No alarmVibrat
1995-8502FIELD OF VIEW:Fuel Size Distance Horizontal Avg. Horiz. Response Time Vertical Avg. Vert. Response Time(feet) (degrees) (seconds) (degrees
HIGH RESOLUTION FIELD OF VIEW200°20°20°30°45°30°45°10090805040302010706040°40°10°10°Field of View at Indicated Distance in Feetfor Methane at Very Hig
Printed in USADetector Electronics Corporation6901 West 110th Street •Minneapolis, Minnesota 55438 USATel: 952.941.5665 or 800.765.3473 •Fax: 952.82
IMPORTANTBe sure to read and understand the entireinstruction manual before installing or operating theflame detection system.WARNINGDo not open the d
Factory configurable options include:• Automatic or Manual Optical Integrity (oi)• Fire and Fault Relay Operation– Normally Open (N.O.) or Normally Cl
Refer to the “Ordering Information“ section for acomplete list of available options and accessories.Table 1 indicates the condition of the LED for eac
INSTALLATIONDETECTOR POSITIONINGDetectors should be positioned to provide the bestunobstructed view of the area to be protected. Thefollowing factors
MOUNTING AND WIRING PROCEDURERefer to the procedure below and the listed figures tomount and wire the X3300.Figure 1 – Detector Orientation Relative t
6Oi ARROW(MUST BE ORIENTED WITH ARROW POINTING UP)VIEWING WINDOW (3)Oi PLATE KNOBOi PLATEDETECTOR STATUS INDICATORA1984Figure 4—Front View of the X330
7 95-8502X3300B1978FIRE ALARM PANELALARM24 VDC+–oi–+FAULT RELAY 1ALARM RELAY 2WIRING NOTES:1 FAULT RELAYS SHOWN HAVE BEEN SPECIFIED (WHEN ORDERED) TO
Kommentare zu diesen Handbüchern