Det-tronics S3 Graphics Bedienungsanleitung PDF herunterladen (Seite 137)

12-22

EAGLE QUANTUM PREMIER DEVICES

Version 6.0

EAGLE QUANTUM PREMIER DEVICES

Alarm LED Latch

The tri-color LED on the face of the detector turns red when in alarm and can be conﬁgured to be either latching

or non-latching. If latching is selected, following a ﬁre detection, the LED will stay on until the detector is reset

from the point display for the detector in the S

software. The default is non-latching.

Fault LED Latch

The tri-color LED on the face of the detector turns yellow when a fault is present (ﬁre over-rides fault) and can

be conﬁgured to be either latching or non-latching. If latching is selected, following a ﬁre detection, the LED will

stay on until the detector is reset from the point display for the detector in the S

software. The default is non-

latching.

PV Deadband

A ﬁeld is provided to enter the desired PV (Process Variable) Deadband.

Normally all values are transmitted to the controller every ﬁve seconds; If the PV changes more than the entered

percentage before the ﬁve second report time arrives, an immediate message is sent with the current values.

MIR H2 X3302 • ALARM LED LATCH

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 326 327

Keine Kommentare

Det-tronics S3 Graphics Bedienungsanleitung Seite 137